Forced Convection Oven (Energy Saving)

Forced Convection Oven (Energy Saving) (DNE811C)

Item Code：

Model：DNE811C

Standard Power Source：AC220V 11.5A

Origin：China

Product Summary

Power consumption reduced by over 30%, an environmentally friendly constant temperature oven that reduces CO2 emissions.

Features

Significantly reduces power consumption and features programmable functions in an environmentally friendly constant temperature oven

Achieves a 30% energy-saving design (compared to previous products) during constant temperature operation through airtight thermal insulation in the chamber

Maximum temperature reach time shortened by up to 15 min (compared to previous products)

Standby time and recovery time are also reduced, achieving operational efficiency

Able to implement various operating modes and is equipped with calibration correction functions, power failure reset mode selection, and user-defined information save and recall functions, among other support features

Able to repeat program operation for up to 99 segments or 99 modes

Equipped with accumulated function for powered/operating time

Various optional features allow for system upgrades based on user needs

Safety Features self-diagnostic circuits, independent overheating preventers with digital settings, overcurrent leakage protection, key locks, and other safety functions

Specifications

Model

DNE811C

System

Forced convection

Operating temperature range

Room temp.+10~210°C

GB standard Temp. fluctuation

±0.5℃ (at 210℃)

Temp. uniformity

±1.5% (at 210℃)

Temp. adjustment accuracy

±0.5℃ (at 210℃)

Temp. distribution accuracy

±2℃ (at 210℃)

Max. temp. reaching time

Approx. 45 min

Interior material

Stainless steel plate

Exterior material

Cold rolled steel plate with chemical proofing coating

Insulating material

Glass fiber

Heater

Stainless steel heating pipe 1.5KW*2

Forced air motor

High-temperature self-cooling motor 30W

Cable port

Inner diameter 33mm (one at upper right side)

Intake vent

Inner diameter 33mm (one at lower right side)

Exhaust vent

I.D. 33 mm × 2, located at the back

Temp. control method

PID control

Temperature setting method

Use special function menu keys and up/down keys to realize digital setting

Setting temp. display

Orange 5-digit LED digital display

Timer

1 min～99 hours 59 min / 1 min

Operation functions

Fixed temp. operation, auto start, auto stop, program operation

Program mode

Program operation max 99 segments, repeat operation function

Additional functions

Power/accumulated running time function (65535 hours), clock display, deviation correction function, cumulative power consumption, CO2 emission, heater output, cumulative power-on time, power failure recovery mode selection, user defined information login

Sensors

K thermocouple (Temp. controller and overheating protector)

Safety device

Self-diagnostic circuit (temperature sensor anomaly, heater disconnection protection, automatic overheating preventer, SSR short-circuit), overheating preventer, overcurrent leakage protection, key lock functions

Internal dimensions (width × depth × height mm)

600×500×1000

External dimensions (width x depth x height mm)

730×695×1675

Internal capacity

300L

Shelf load

15kg/ layer

Shelf layers / shelf support spacing

13 layers/30mm

Standard Power Source

AC220V 11.5A