Method
Forced convection circulation
Operating temperature range
Room temp.+10~500°C
Temp. adjustment accuracy
±0.5℃(at 500℃)
Temp. distribution accuracy
±3℃(at 300℃)、±5℃(at 500℃)
Max. temp. reaching time
Approx. 60min (at 500℃)
Interior material
Stainless steel plate
Exterior material
Cold rolled steel plate with chemical proofing coating
Heater
Alloy heating wire, 7.8KW
Insulating material
Ceramic fiber block, Heat insulation block, Rock wool
Blow fan / motor
Propeller fan / Condenser type motor
Exhaust port/Cable hole
I.D. 80mm with damper x 1 pc. (at back)
Heater circuit control
SSR driving
Sensor
K thermocouple (Temp. controller and overheat protector)
Damper
Circulation, Exhaust control by manually
Safety device
Self-diagnosis circuit (Abnormal temp. sensing, Heater disconnection, Auto overheat prevention, SSR short circuit), Overheat protector, Overcurrent ELB, Key lock.
Additional functions
Calibration offset, Key lock, External alarm
Shelf plate with standard load
30kg / piece
Shelf support step number/pitch
9 steps / 60mm
Shelf plate
Stainless steel wire shelf 3 pcs
Internal dimensions(W×D×H mm)
600×600×600mm
External dimensions(W×D×H mm)
1350×950×1300mm
Power Source
AC380V12.5AThree-phase