Washing water temp.
Supplied temp. to 80℃
Accessories
Supply hose I.D.18mm, 2m×1pc, Drain hose (with coupler) 2m×1pc, Detergent (Amorphous phosphorus) 1kg, Measuring spoon (for 50ml) 1pc, Test tube rack support 1pc, Hose clamp 1pc
Washing compartment
Two washing chambers
Washing compartment
Pressure water jet from two directions (Top and bottom), Jet nozzle spinning
Washing compartment
Upper : Jet nozzle rotation, Lower : Fixed type (jet rack)
Washing pattern
Selectable three washing patterns *Final rinse is option
Washing pattern
1. Pre-washing → Washing → Rinse → Final rinse*
Washing pattern
2. Washing → Rinse → Final rinse*
Washing pattern
3. Rinse → Final rinse*
Washing time
Pre-washing, Washing, Rinse: settable 1 to 99min
Washing time
Rinse: settable up to 5 times by batch system
Washing time
Final rinse (to connect with pure water supplying system): Rinse by pure water 50L, settable up to 5 times, start to wash after reaching to the set water level, Timer count starts after reaching to the setting temp.
Supplying water temp.
Room temp. to 60℃
Washing water temp.
Water supply temp. to 80℃. Same water temp. for pre-washing and washing, no water heat-up for rinse and final rinse
Liquid detergent supplying type
Automatic supply by pump (Adjustable supply amount)
Liquid detergent tank capacity
2L
Required water amount
Approx. 28L for each pre-wash, wash and rinse
Hot water supply system
Heater (Built-in: 6kW) heat-up or connection to primary hot water supply
Container stand
Shelf board 2pcs. (Standard)
Water supplying system
Solenoid valve Open/Close, water flow amount is fixed by flow switch
Water drain system
Forced drain by pump
Exterior
Chrome-free electrogalvanized steel sheet, baking finish
Pump
Washing pump: 355W/560W Drain Pump: 45W
Shelf board
550×550mm, max. load 245N (25kg)
Internal dimensions(W×D×H mm)
600×630×1080mm
External dimensions(W×D×H mm)
860×770×1795mm
Power Source
AC220V/AC380VThree phase with step-down transformer