Oil bath

Oil bath(BOS200)

Item Code：222125

Model：BOS200

Power Source：Single phase AC100V (50/60 Hz) 5.0A

Origin：Japan

Product Summary

The New Standard for Synthesis Experiments

Features

Stainless steel with good heat retention

Safe and reliable bath operation with reduced failure risks

Anti-slip Structure for Stirrer Operation

Minimizes oil waste through recommended oil volume guidelines

Safety design incorporating independent overheat preventers and heater guards

Accurately adjust the reaction temperature to the desired level

Specifications

Model

BOS200

Item Code

222125

Bath

Stainless steel plate

Exterior

Stainless steel sheet / Chrome-free electro-galvanized steel sheet, Baked finish

Heater capacity

425W, at 100V

Temperature setting range

0 to 260°C

Temperature control range

Room temp. +5 to 250°C

Temperature control accuracy

±0.3°C (at 200°C, when stirring)

Temperature control method

P.I.D. control, Temperature difference control

Temp. setting and display method

Digital setting / display with UP/DOWN key (Indication 1°C Unit)

Operating functions

Fix temp. operation

Additional functions

Calibration offset function, Power failure compensation selection function, LED brightness switching function

Heater circuit control

Triac, Zero cross method

Sensor

Pt100 sensor (Class A)

Safety Devices

Self-diagnosis function (temperature sensor error detection, automatic overheating prevention function, communication error, abnormality out of set temp. range), Fuse (6.3A short-circuit, overcurrent protection), Independent overheating prevention device

External dimensions (diameter×depth×height)

φ185×240×180mm (including heater unit)

Bath inner dimensions (inner diameter×height)

φ170×140mm

Bath capacity No load (recommended)

Approx. 1.7L

Bath capacity No-load (maximum)

Approx. 2.2L

Controller unit (W×D×H)

150×90×45mm (protrusions not included)

Power Source

Single phase AC100V (50/60 Hz) 5.0A

Bath and heater unit Weight

Approx. 2.9kg (including cable)

Controller unit Weight

Approx.0.5kg

Total weight

Approx. 3.4kg

Accessories

Approx. 2.3kg Approx. 2.8kg Approx. 3.0kg Approx. 3.4kg Accessories Heater guard (1 set), Arbor (outer diameter φ12×90 mm: 1 piece), Stirring bar (approx. φ8×50 mm: 1 piece) Connector cap (1 pc), Identification sticker (1 pc), Zip tie with tag (3 pcs)

Catalog